Speedy Electric R/C Sailplane

Fast climbing, smooth flying electric launched sailplane

This item is discontinued and no longer available.
63" wingspan, 38" long, 434 sq. in. wing area, 40 oz. flying weight, RG14 airfoil. Smooth fiberglass fuselage with motor mount pre-installed. Elevator servo will be mounted in the tail for slop-free operation. Wing construction is built up balsa and plywood with balsa sheeting, pre-covered in heat shrink covering. The two wing halves are connected with a strong fiberglass spar joiner. The ailerons have independent servos. Canopy hatch provides easy access to the motor, electronics, and flight batteries. Powerful performer, climbs to thermal altitude in seconds then transitions to a flat glide that signals lift well. Recommended motor and battery provides plenty of power for a dozen climbs to altitude. A clear exploded view drawing guides you through the approximately 4-hour assembly. Suitable for the intermediate builder and pilot. For 3 channels: Ailerons, Elevator, and Throttle.

Radio
1 - HTR48725 Hitec Neon 3 SS, Micro 05 Receiver, 2 HS-55 Servos
1 - HTS055 Hitec HS-55 Servos
1 - HT0096 Hitec Aileron "Y" Connector
1 - HLAE320 24" Extension for Hitec/JR

Motor/Prop
1 - AM231226 Atlas Outrunner 2312/26
1 - HLAN3423 9x7 Carbon Fiber Cam Blade
2 - DKT3631 36mm Turbo Spinner for 3.2mm Shaft

Motor Controller
1 - JEE018 ECO 18 Amp Brushless Controller

Battery
1 - PQ18003 "Twenty" 3 Cell 11.1V 1800mAh Lipo Pack

Charger
1 - ETC2030 Smart Charger for 1-3 LiPoly or 1-8 Ni Cells
1 - BAT220 JST to Deans Ultra Charger Lead

Accessories
1 - HC002AP Accessory Pack for Speedy
Glue, Solder, Connectors, etc.