Telemaster 40 RC Airplane Kit

The world's BEST RC trainer -- now for electric or glow power!

73" wingspan, 53-1/2" long, 848 sq. in. wing area, 96 oz. flying weight, less than 16 oz. per sq. ft. wing loading. This is an all balsa and hardwood kit that takes about 40 hours to build and cover and install flight equipment. Hundreds of modelers have had their first successful flying experience with a Telemaster, and many beginners have successfully flown Telemaster 40 without assistance. The electric power system that we recommend will fly the airplane for over 10 minutes, with better performance -- quicker takeoffs, steeper climbs -- than a glow engine.

The kit can be built as an electric powered airplane or as a .40 powered glow plane. For 4 or 5 channels: Rudder, Elevator, Ailerons (2 servos), Throttle. The kit also includes Flaps (1 servo). The Telemaster 40 is very easy to land and this makes it an excellent airplane for a beginner. If you are a beginner, build it fairly well, and do some imaginary flights before the actual first flight, you will probably have no problems soloing Telemaster 40 on your first RC flight. You can also fly Telemaster 40 with a glow engine.

Radio
1 - SPM5500 Spektrum DXe Transmitter, AR500 Receiver, no servos
4 - HTS0322S HS-322 Standard Servo
2 - HT0097 Hitec 12" Servo Extension
1 - HT0096 Hitec Aileron "Y" Connector

Motor/Prop
1 - PM282612 AXI Gold 2826/12 Outrunner Motor
1 - PM282002 Radial Mount Set for AXI 28 Series Motors
1 - PE13080E 13x8E Thin Electric Prop

Motor Controller
1 - JAP40 Jeti Advance Pro 40 Amp Brushless Controller
1 - JAP01 Jeti Advance Pro Program Card * optional

Battery
1 - TP43503SPL2 3 Cell 11.1V 4350 mAh Pro Lite Vs 20C LiPo

Charger
1 - SRC680 B6-Pro 80 Watt Balance Lipo Charger for 1-6 Lithium Cells


Accessories
Glue, Solder, Connectors, etc.