Tiger Moth Scale RC Model Biplane

Specifically designed for AXI OUTRUNNER motor, easy to build and fly!

50" wingspan, 40-1/2" long, 758 sq. in. wing area, 64 oz. flying weight. Totally designed as an electric airplane. Battery box and motor spacer for AXI motor on a radial mount are pre-built. There are only two places that require glue in the entire build. The rest is all assembled using a screwdriver and small wrench. All flying surfaces are pre-hinged and the mounting points for the pull-pull hardware are pre-drilled. Complete set of functioning flying wires is included. Airplane comes pre-built and pre-covered with all decorations in place, can be built in 4-6 hours. AXI motor provides lots of power, you will fly at less than 1/2 power most of the time. Flies best in light wind, slow flight, touch and goes, slips to landing--relaxed flying at its best. Instructions included. For 4 channels, Ailerons (2 servos), Elevator, Rudder and Throttle.

Radio
1 - HTR971B Laser 4 Channel FM with 2 HS-322 Servos
2 - HTS081 Hitec HS-81 Micro Servo
2 - HT0097 Hitec 12" Servo Extension
1 - HT0096 Hitec Aileron "Y" Connector

Motor/Prop
1 - PM282010 AXI Gold 2820/10 Outrunner Motor
1 - PM282002 Radial Mount Set for AXI 28 Series Motors
1 - PE11055E 11x5.5E Thin Electric Prop
1 - HLHS175B Spinner 1-3/4" Black

Motor Controller
1 - JAP40 Advance Pro 40 Amp Brushless Motor Controller
1 - JAP01 Jeti Advance Pro Program Card * optional

Battery
1 - TP33003SPL2 3 Cell 11.1V 3300 mAh Pro Lite V2 LiPo

Charger
1 - SRC506 iC6 LiPlus Intelligent Balance Charger

Accessories
Glue, Solder, Connectors, etc.