UHU Por Glue for Styrofoam |
1.4 oz. tube (40 grams). Does not melt foam. Works primarily as a contact glue, apply thin layer to both mating surfaces, allow to set for 10 minutes, then press together. Make sure you are correctly aligned before touching pre-glued parts together, part will be difficult to re-position. Will glue anything to foam or foam to itself. Dries fast.
One of the best glues that I've used for canopy attachment.
It has a decent strength, and can be used when you might need to pry things apart, or need a non rigid
joint. Over time, it may become "stiffer".
For full strength, wait up to overnight.
Works well with many plastics and foam, but test to make sure.
This glue seems to be in demand, and "out of stock" status is not uncommon.
|
|
Write Your Own Review |
Read All Reviews...
|
Please call our support line toll free: (866) 512-1444 for assistance with this product
|